Those looking for SDS vs SDS plus drill bits should definitely read this blog post. It is possible to use SDS bits in many different types of masonry materials. We will discuss differences between SDS bits on the market today and explain what it is and how it works in this article. In addition, we’ll discuss what SDS bits you should buy for your next project, as well as how to choose the right sds drill bit sizes for your job.

What is sds drill bit

SDS drill bits, also known as chisel drills or hammer drills, are powerful hammers that are best suited for drilling heavy-duty materials. Power tools can also be used to drill through materials like steel, bricks, masonry, and concrete, in addition to drilling.

Their combined hammer-and-rotary action combines the benefits of a rotary and a hammer drill into a valuable, highly efficient power tool.

The meaning of SDS in SDS drill bits has not been definitively defined, but most people believe SDS stands for slotted drive system.

What are SDS – Plus Drill Bits?

Later, SDS-Plus was introduced which improved on SDS for better connectivity and works interchangeably with regular SDS.

There is a physical difference in the size of the drill bits and that is one of the reasons we get confused in sds vs sds plus drill bits. Throughout the SDS Plus range, the shank is 10mm, and the length is shorter to suit lighter duty applications and smaller diameter holes. These bits don’t have to be reserved for household jobs. A SDS Plus bit will sometimes be needed when the job doesn’t require a larger hole or when you’re close to the edge. If you are working close to the edge, a smaller, less powerful drill is preferred because it reduces the possibility of chipping off pieces of concrete from the outside edge.

In concrete construction and masonry applications, such as in stone or brick, SDS bits are most commonly used after anchors have been installed. As a trades professional, you will find that different SDS drill bits have their advantages and disadvantages.

It’s imperative that you make sure the SDS masonry bits you purchase are compatible with the drill you currently use. The application you intend to use must also be considered. Do you intend to drill holes of a certain diameter? In what area do you want to drill? Stone, brick, concrete? Will there be dust from concrete drilling? Your decision on these questions will greatly influence how your project turns out. As soon as you are done with these, you are ready to move on to features and bit types.

 SDS vs SDS Plus drill bits

There is a noticeable difference in size between SDS Max and SDS Plus. A SDS Plus bit, on the other hand, is usually thinner and smaller than a SDS Max bit. The diameters of the SDS Plus and SDS Max shanks are ten millimeters and eighteen millimeters, respectively.

 It is neither exclusive nor nonexclusive. Therefore, there are four splines in a shank of an SDS Plus, which allows it to be more stable. Both of these have shanks that have a diameter of 10mm. The 18mm shanks on SDS Max bits make them incompatible with SDS and SDS Plus bits.

There have been several variations of SDS over the years, and it stands for “Slotted Drive Shaft” today. SDS drill bits have the great feature of not spinning inside the drill while they are in use. There are a number of different types of SDS bits that you might encounter, which can make your project a lot easier to handle.